I had wind noise from the upper front edge of the driver’s window. I figured it was normal until I was recently a passenger in the car and didn’t notice the noise on that side. I believe the seal shrinks a bit in the colder weather we’ve been having. Frank reset the window upper torque for me and it seems to have disappeared. The procedure wassimple, although it did require both of us. I had the extremely difficult job of operating the window switch while Frank did the rest. With the door open, we lowered the window about halfway and then, once Frank was ready, raised it fully and continued to hold the window switch in the up position while Frank simultaneously placed his hands on the inside and outside of the glass and firmly pushed it upward for about five seconds even after it was fully closed. Voila! The idea was to retrain the window that its closed position is slightly higher. My wind noise has not returned.