Gravity 3.5.1

Defaulting back to hold is also by design it says it in the manual. When you set to creep you have the option to put it on the Pilot Panel car controls, that's the quickest way if you want to use Creep. Personally as someone who drove manual cars only before I went to an EV I can't stand Creep.
I agree, I think creep is quite dangerous and can understand why it defaults to hold but to each their own. I had it on once and didn't realize that it actually creeps in reveres as well, took my foot off the brake and it nearly reversed into a wall, never used creep since. Maybe I'm missing something but I don't get why it became a "thing" in EV's
 
I'm having a similar experience. And what's worse is that it's maddeningly inconsistent. Sometime it will lock when I'm just 10 feet away, moving from the garage into my house. Sometimes (and increasingly often) I can get 50+ yards away in a parking lot and it seems as if it's never going to lock. I can often get out of fob button-pressing range, so I don't understand why the car can't determine that the fob is out of range and lock itself.
Agree. It's the inconsistency that drives me up the wall. Would rather it just work or not work! Surprisingly, lock/unlock works 100% of the time at home and it only decides to act up when away from home. You know, when you actually need it to work 100% to stop people from possibly getting into your car.
 
I agree, I think creep is quite dangerous and can understand why it defaults to hold but to each their own. I had it on once and didn't realize that it actually creeps in reveres as well, took my foot off the brake and it nearly reversed into a wall, never used creep since. Maybe I'm missing something but I don't get why it became a "thing" in EV's
I use it the same as an automatic transmission and prefer it, especially for parking. Creep in the Lucid is way worse than any other car though, its not smooth at all, if it works at all. They should just get rid of it. Tesla and BMW did it right.
 
I guess I'm a little frustrated here reading all this. Does anyone know what the rollout schedule is? I have a DE and can't understand why the update hasn't even been offered to me yet. Currently seeing "up to date" with 3.4.1 on app and inside.
You need to get updated to 3.4.4 first and then the update to 3.5.1 will happen. Updates have to be done in order and you can't skip an update. @marqie should be able to help you out.
 
I am a big fan of the creep mode and drives me up the wall that there is a setting for what you want the default to be and it doesn’t care for what I want!!

I tried hold for a bit and I find it jerky in use, creep is super smooth for me forward or back.

First thing I click when I enter the vehicle, really annoying.
 
Creep works well for me and I love it for parking and tight spaces. Wish they ported Air's Tap-to-Creep or allow changing Hold/Creep while driving... for now I use creep to get out of the garage and drive way and then park->back to Hold for driving and stoplights.
 
No, it only unlocks by pressing it. If it's popped out and you push it, nothing happens.
I actually got it to lock by pressing the popped out handle one time. Probablem is I have no idea what conditions of sequence of events needed to happen. I had just opened the car to get something out of it with my phone app.
 
I don't know if anyone else is experiencing an increase in occurrences where the rearview camera display doesn't appear when putting the Gravity in reverse. I just had my second occurrence in less than a week. A soft reset resolves the issue, but this is a dangerous software bug that I only have seen since 3.5.1 rolled out.
 
Defaulting back to hold is also by design it says it in the manual. When you set to creep you have the option to put it on the Pilot Panel car controls, that's the quickest way if you want to use Creep. Personally as someone who drove manual cars only before I went to an EV I can't stand Creep.
I hope they change this in future software upgrades. My polestar kept whatever setting I asked it to do.
 
I actually got it to lock by pressing the popped out handle one time. Probablem is I have no idea what conditions of sequence of events needed to happen. I had just opened the car to get something out of it with my phone app.
Yeah, I've learned I can do that, but it's finicky. Sometimes, I press the handle and the car locks correctly. Other times, I notice the handle motor fights me and keeps forcing the handle out. Other times, the car locks and immediately unlocks.

It's just mind boggling to me this car so many problems with locking and unlocking. This is a solved problem for decades.
 
Yeah, I've learned I can do that, but it's finicky. Sometimes, I press the handle and the car locks correctly. Other times, I notice the handle motor fights me and keeps forcing the handle out. Other times, the car locks and immediately unlocks.

It's just mind boggling to me this car so many problems with locking and unlocking. This is a solved problem for decades.
I've found that the handle is reliable for push-unlock but quite a sensitive little booger when I press-to-lock. Not hard enough = no response. Doink on it too hard = (sometimes) it locks but the handle remains partially protruding. Agree that it is just stupid that this can't be more consistent & intuitive for such a important point of tactile interaction with the car.
 
Yeah, to unlock the car, it's very straightforward. Push it, it always pops out with no drama.

The lock part is so stupid that, during my delivery, they said you can't lock the car by pushing the handle in.
 
I don't know if anyone else is experiencing an increase in occurrences where the rearview camera display doesn't appear when putting the Gravity in reverse. I just had my second occurrence in less than a week. A soft reset resolves the issue, but this is a dangerous software bug that I only have seen since 3.5.1 rolled out.
I've noticed it since 3.5.1 rolled out, it works randomly and makes no sense as to when it works and when it doesn't work.
 
This update rolled out quite quickly compared to others so it’s probably time to contact customer care to check if there’s an issue or not.
If you're talking about version 3.5.1, it's interesting that it's stopped at "68 of 85 vehicles updated, 80.0%" (according to your lucidtracker.com site.)

Purely speculating, but they could be doing a "holdback" experiment where they leave some vehicles on an older version to provide a baseline for telemetry or stats they want t collect across the fleet.
 
I agree, I think creep is quite dangerous and can understand why it defaults to hold but to each their own. I had it on once and didn't realize that it actually creeps in reveres as well, took my foot off the brake and it nearly reversed into a wall, never used creep since. Maybe I'm missing something but I don't get why it became a "thing" in EV's
The only way it's dangerous is if you're not used to it. Every automatic car for decades would start moving as soon as you started letting up on the brake, in drive or reverse, so it's hardly an unusual action for most people.
 
The only way it's dangerous is if you're not used to it. Every automatic car for decades would start moving as soon as you started letting up on the brake, in drive or reverse, so it's hardly an unusual action for most people.
That’s why smart people never drove automatics 😁
 
Same this has been happening a lot to me recently
Good, it’s not just me then. Hopefully it doesn’t take NHTSA complaints to get these issues taken care of. I think the NHTSA is the only reason Tesla corrected some of their software issues, including delayed backup camera images appearing.
 
That’s why smart people never drove automatics 😁
I always preferred my manual vehicles but they suuuucked commuting in traffic every day, so I have no problem with people who don't drive for pleasure/enjoyment using an automatic for commuting because they just need an easy tool to get from point A to point B.
 
I'm an outlier in that I preferred manuals in stop and go traffic. Rarely commuted by car (walk, train, walk commute for 30 years) but when I did drive the BQE, FDR combination I much preferred my manual vehicles I did it in compared to the one automatic I owned.
 
Back
Top