Creaking noise when rolling to stop

[Aka-none]

To my understanding, HOLD applies the electric brakes upon a stop.

Making noise as they release also makes me think it could be sticking disks, which EVs are notorious for because most of us drive fully in regen and rarely apply the friction brakes, which in turn get dirty/rusty.

Try coming to a stop with vigorous use of the brake pedal a few times to clean the disks of rust. It might go away if so; easy fix to try.

But I agree it is worth keeping an eye out for the loose half-shaft recall issue. Be safe!

You also get sticky calipers (pistons) from not using the brakes periodically

Unless you like doing a brake job due to corrosion

 

[kopik]

Try roll with regen on. That will separate automatic brakes from driveline.

The car is already in service and awaiting the front drive unit replacement.

 

[Jon Wierer]

I had the same problem. Initially, they told me they would replace the drive unit. However, in the end, all they had to do was retighten the half-shaft nut to torque spec. My car sat at the Atlanta service center for 2 months to do this, but that is another story.

 

[kopik]

My car is in service already for almost 3 weeks because of that and they haven't even started to work on it (San Jose, CA center). I am not surprised and don't expect it to be repaired any time soon.

 

[Skipper]

Is this related to HOLD or just a sound when driving the car?