What's new
By:

Gravity accessories slowly appearing

Saksak said:
Any idea of range degradation with just the crossbars?
Click to expand...
Very little, but it's been hard to tell because it's been so cold during a lot of my driving and the temperature is surely the main culprit, and because this vehicle has had the crossbars on since day one. I can tell you that the Thule Motion XXL Low roof box performed excellently and also contributed much less than I'd expected to range loss.
 
allenmhc said:
I received my Leather Brut leather keyfob covers today! They look good, and fit snug. One caveat (that I didn't think of at the time I ordered them) is that having covers will make it harder to replace batteries when they inevitably run out; ah wells.View attachment 35852
Click to expand...
Mine arrived in the brown/grey color but work quite nicely and are high-quality. Happy with them.
 
I really want to see everyone’s center console bins when you’ve printed them! Sent out the files to 10 or so of you folks and I’m excited to see what everyone came up with.
 
KLusinyan said:
I really want to see everyone’s center console bins when you’ve printed them! Sent out the files to 10 or so of you folks and I’m excited to see what everyone came up with.
Click to expand...

I've been working on mine but going out of town tomorrow (off to Disneyland) so I probably won't get back to them until next week or so.
 
KLusinyan said:
I really want to see everyone’s center console bins when you’ve printed them! Sent out the files to 10 or so of you folks and I’m excited to see what everyone came up with.
Click to expand...
my printer is having trouble printing asa (bed adhesion) so I have to retry a few prints
 
borski said:
my printer is having trouble printing asa (bed adhesion) so I have to retry a few prints
Click to expand...
Clean the bed plate with dish soap to clean oils and stuff if you touched it, rise the bed temp, add a brim. And to avoid or at least minimize warping make sure the chamber temp is in 40+ C.
My printer is in cold garage (30-50F temps). I had to use 110C bed temp on textured plate, with brim to minimize warping. But with all of that it still warped a little bit on the corners.
I need to invest in chamber heater.
 
hwy17er said:
wow...what sh1t show!
How are yours working @Ron_Burgundy ?
Click to expand...
Mine are completely fine. BUT…the pads are what I whined about most in post originally months ago. They’re terrible - like 3M foam. I am curious why I’ve not been contacted as I definitely have the first gen crossbars.

That said, they ARE working and stable and I don’t see issues (yet). But I haven’t removed them, so can’t see if they’ve damaged the roof. I am super nervous they will, but had to be able to carry skis and snowboards and don’t have tow package.
 
blagar1000 said:
Very little, but it's been hard to tell because it's been so cold during a lot of my driving and the temperature is surely the main culprit, and because this vehicle has had the crossbars on since day one. I can tell you that the Thule Motion XXL Low roof box performed excellently and also contributed much less than I'd expected to range loss.
Click to expand...
I’ve had them on for months and had no noticeable degradation. Even with my Kuat 6 installed (as long as it’s folded down when not in use), no real range degradation.

Someone upthread asked about installation of the crossbars. It’s incredibly annoying and overly complicated - especially compared to our R1S, which takes minutes. You won’t be taking the crossbars off and on often unless you’re a glutton for punishment.
 
Ron_Burgundy said:
I’ve had them on for months and had no noticeable degradation. Even with my Kuat 6 installed (as long as it’s folded down when not in use), no real range degradation.

Someone upthread asked about installation of the crossbars. It’s incredibly annoying and overly complicated - especially compared to our R1S, which takes minutes. You won’t be taking the crossbars off and on often unless you’re a glutton for punishment.
Click to expand...
Yeah the service center said they were not the easiest thing to install. I think they look pretty cool with the Abyss Black paint too. But I still may want them off for part of the spring/fall if I'm in for service. They're mostly for skis and summer travel for me. Spring/fall will be bike hitch time. Still contemplating there...
 
CraZ8 said:
Just got my rear mat from Averyautomats.com. I sent them a template and it came out great. It’s in graphite grey with the additional binding on the edge and rubber backing. Fits perfect and is flexible enough to allow easy access to the trunk storage or for you 7 seater people can be folded up against the third row or stored in the trunk. For those of you with different interiors they have a multitude of colors and will send you swatches. They start at around $120 with thickness, stitching logos extra. Mine was $145. View attachment 36116View attachment 36117View attachment 36119 View attachment 36118View attachment 36120View attachment 36121View attachment 36122
Click to expand...
I cannot find this on their website, could you please post a link?
 
I wish I could get only driver/passenger ones. I don't like the look of the back ones at all with the cutouts...but I get they have to be there.
 
raleighone said:
I wish I could get only driver/passenger ones. I don't like the look of the back ones at all with the cutouts...but I get they have to be there.
Click to expand...
The cut outs do have to be there. But if you email LinerX, I bet they’d sell you just the front ones if that’s what you want. They seem fairly reasonable and responsive. YMMV
 
Ron_Burgundy said:
The cut outs do have to be there. But if you email LinerX, I bet they’d sell you just the front ones if that’s what you want. They seem fairly reasonable and responsive. YMMV
Click to expand...
Good to know. I've found that flexibility rare these days, so great to hear they are good to work with. The price on the 2 row is pretty great...so maybe I'll just buy that one since I only have 5 seater anyways. Thx!
 
We just received the second pair of collapsible storage bins for the Gravity frunk. The first pair turned out to be one the handiest car accessories I've ever bought for putting groceries in at a checkout counter. When you get to the car, you just lift the bins from the grocery cart into the car, which really speeds things up if it's raining or someone is waiting for your space.

However, when we're on a stockpiling run to Costco we sometimes need more room. An extra pair fits perfectly on the rear cargo shelf of the Gravity with room to spare. (It's just amazing what that car will swallow even with the third row up.)
 
Just curious. Will the Cargo Bins fit on top of the Frunk Seat? Guess I could easily remove the seat when making the Costco run :)
 
DDX said:
Just curious. Will the Cargo Bins fit on top of the Frunk Seat? Guess I could easily remove the seat when making the Costco run :)
Click to expand...
yes mine fit on top of the seat
 
ilyabu said:
yes mine fit on top of the seat
Click to expand...
Good to know. Per FedEx, both my frunk seat and cargo bins are being delivered today. Guess I can put them all in at once!
 
Emailed TWRAPS to ask about Gravity screen protector ETA and got this: "I hope to rent a Gravity in Q2 and then we will make them! :)". Need to wait a bit longer.
 
You must log in or register to reply here.
Back
Top