What's new
By:

EZPass Mounting Location in the Gravity

jace

jace

Active Member

Verified Owner
Supporting Member
Joined
Jun 16, 2024
Messages
143
Reaction score
204
Location
Chicago
Gravity owners, can you share pics location of your mounting location for your toll tag?

I put mine at the top of the windshield above passenger head and it does not look like it read the IPASS toll in IL.
 
Mine is below the rear view mirror and don't think it is being read either!
 
This is the location that was shown in one of the threads on this Forum.

1763563536527.webp
 
In the Air Touring I had it in the center just under that forward looking camera. I am in Chicago area with the sticker tag.
 
EZPass also has License Plate Transponder (LPT) version.
That's option I am going with. I'll mount on black plastic just below the body-colored front bumper.
1763569047708.webp
 
Gravitas said:
EZPass also has License Plate Transponder (LPT) version.
That's option I am going with. I'll mount on black plastic just below the body-colored front bumper.
View attachment 34450
Click to expand...
This has worked for me. I'm in a state where a front license plate is required. Not sure I'd do it if no front plate was required.
 
Where are our no front platers seeing success. I tried behind the drivers shade and it’s a no go. Also tried to the right of the mirror with no luck.
 
Had service center put post it stickers around the Gravity rectangular place for IPass transponder. Air is different. Note the inside edge of postits mark the outside of the mounting area. I have three different transponders to use in different locations ( ie qualify as a local) and I marked the top and bottom corner levels on the mirror/camera windshield cover to mark a consistent placement.
IMG_1040.webp
 
So just circling back here, I mounted it just under the forward facing camera housing. I drive on IPASS in Chicago, we just took a bunch of highway road trips, and it doesn't seem to be able to scan it as far as the RFID tag/sticker, I have verified it's activated and registered.
 
Like I have noticed and can see there is a different type of tinting material or UV ray blocking on the windshield that looks different from the outside looking at the tag...
 
illopp00 said:
So just circling back here, I mounted it just under the forward facing camera housing. I drive on IPASS in Chicago, we just took a bunch of highway road trips, and it doesn't seem to be able to scan it as far as the RFID tag/sticker, I have verified it's activated and registered.
Click to expand...
Same issue here, I'm that guy on on Indiana Toll Road constantly holding up the EZPass lane since my IPASS seems to not work anywhere.
Have you found a good spot yet?
 
Somewhat related to EZPass. The is the location where my neighborhood gate RFID tag works (rectangular tag near center bottom). I tried inside the windshield and it didn't work there. The round tag next to the LIDAR is a NFC Tag I use to open the frunk:

IMG_3423.webp
 
illopp00 said:
So just circling back here, I mounted it just under the forward facing camera housing. I drive on IPASS in Chicago, we just took a bunch of highway road trips, and it doesn't seem to be able to scan it as far as the RFID tag/sticker, I have verified it's activated and registered.
Click to expand...
That is not where it goes. See the post above by @DrK
 
DrK said:
Had service center put post it stickers around the Gravity rectangular place for IPass transponder. Air is different. Note the inside edge of postits mark the outside of the mounting area. I have three different transponders to use in different locations ( ie qualify as a local) and I marked the top and bottom corner levels on the mirror/camera windshield cover to mark a consistent placement. View attachment 35376
Click to expand...
@DrK are you using an IPASS RFID Sticker here or order transponder? Is it working?
 
DrK said:
Had service center put post it stickers around the Gravity rectangular place for IPass transponder. Air is different. Note the inside edge of postits mark the outside of the mounting area. I have three different transponders to use in different locations ( ie qualify as a local) and I marked the top and bottom corner levels on the mirror/camera windshield cover to mark a consistent placement. View attachment 35376
Click to expand...
This should be sticky tagged, as I was wondering where to mount my pass. I was able to see the area by moving my Gravity into the sun. The clear area is faint but noticeable if you look carefully in good light.
 
I had to use a strong flashlight at an acute angle to the windshield to see it from the outside. Put some masking tape around it, then mounted Fastrak from the inside.
 
Ok sounds like I need to remove the current one and reorder a new one...
 
illopp00 said:
Ok sounds like I need to remove the current one and reorder a new one...
Click to expand...
Wait, did you put it in the right place? It goes to the right of the front camera housing, not underneath it.
 
borski said:
Wait, did you put it in the right place? It goes to the right of the front camera housing, not underneath it.
Click to expand...

Yes, but what @illopp00 is saying is they put the IPASS sticker below , they are not able to be taken off and replaced, you have to order a new one to remount it.

I ordered a pair of these of Amz to mount my stickers, @illopp00 you may want to request a new sticker and trying using this: https://a.co/d/hdVcQB8
 
That is a useful way to make them moveable, unlike the current design...
 
You must log in or register to reply here.
Back
Top