What's new
By:

Lucid Gravity UX 3.6 is here!

Dank said:
I did but messages going there go into the void in my experience.
Click to expand...
Would contact your local center. Not sure what's up with the customer service number-repeatedly on hold for 15-20min before giving up.
This is not a primary vehicle for the feint of heart.
 
Ha. My local service center always goes to voicemail and no call back. It’s insane.
 
What about asking @marqie for help with the remaining vins without 3.6?
Make a list here in this thread.
 
I installed 3.6 a couple of days ago on my GGT (DD2Pro equipped). Install went off without a hitch and I’m rolling with most of the enhancements. Hands-Free Drive Assist has been a fail however. I’ve been waisting a lot of electrons driving up and down the freeway trying to calibrate in accordance with Lucid’s calibration guidance.

Does anyone have any tips or tricks to activate Hands-Free Drive Assist? …Thanks
 
HomeIn2 said:
Does anyone have any tips or tricks to activate Hands-Free Drive Assist? …Thanks
Click to expand...
Drive in the center lane on a major 6-lane freeway (3 in each direction) where you have a lane on both the left and right. It didn’t take long for me - less than 5 miles of driving.
 
Saksak said:
Drive in the center lane on a major 6-lane freeway (3 in each direction) where you have a lane on both the left and right. It didn’t take long for me - less than 5 miles of driving.
Click to expand...
Thanks for the reply. That’s exactly how I did it. Two separate occasions for an hour each time. Question… Did you have DD activated while you’re doing the calibration drive?
 
HomeIn2 said:
Thanks for the reply. That’s exactly how I did it. Two separate occasions for an hour each time. Question… Did you have DD activated while you’re doing the calibration drive?
Click to expand...
The car won't let you activate DD until calibration has completed.
 
DeaneG said:
The car won't let you activate DD until calibration has completed.
Click to expand...
Hmmm… i’m still able to activate DD just like I was before the 3.6 install.
 
HomeIn2 said:
Thanks for the reply. That’s exactly how I did it. Two separate occasions for an hour each time. Question… Did you have DD activated while you’re doing the calibration drive?
Click to expand...
I’m surprised it took over an hour. It was 15-20 minutes for me. I started on city streets and entered the highway. It was rush hour on a Friday so there were varying condition of light traffic to moderate traffic to heavy traffic. Maybe the calibration process needs varying highway conditions where it can detect clear roads as well cars.
 
HomeIn2 said:
Hmmm… i’m still able to activate DD just like I was before the 3.6 install.
Click to expand...
If you are able to activate, it means the calibration is done. Are you getting the normal steering wheel symbol with lane centering working when you activate DD?

Hands-free is only available on select highways and you’ll see a modified steering wheel icon with hands near (off) the steering wheel.
 
Saksak said:
Are you getting the normal steering wheel symbol with lane centering working when you activate DD?
Click to expand...

Yes, I see the normal steering wheel and I’m able to use the standard lane-centering DD without any issues. So are you saying the freeway I’m driving - US 101 in S. CA - isn’t full Hands-Free compatible?

Also, and i’m not sure if this is related, but my Driver Awareness feature is showing as Inactive too.
 
Last edited:
HomeIn2 said:
Yes, I see the normal steering wheel and I’m able to use the standard lane-centering DD without any issues. So are you saying the freeway I’m driving - US 101 in S. CA - isn’t full Hands-Free compatible?

Also, and i’m not sure if this is related, but my Driver Awareness feature is showing as Inactive too.
Click to expand...
101 is definitely HF capable.

If a reboot and/or deep sleep don’t resolve it, there is something wrong with the hardware on your car. I’m betting you have a bad camera. You should have it checked by service.
 
Late to the game, I was out of the country when 3.6 dropped. I'm getting the "Incorrect Password [16]" error when trying to verify my account.

I have:
- Hard rebooted the vehicle
- Disconnected WiFi
- Changed the account password
- Changed the account password again
- Rebooted again

Nothing seems to work. Is there anything else that has solved this, or is this now "call Customer Care and ask what the @#$@!?!!" ?
 
Did you change the password in the lucid website? Or how and where did you try it.
 
Lycra said:
Did you change the password in the lucid website? Or how and where did you try it.
Click to expand...
Yes, on https://lucidmotors.com/portal as indicated, and the old and new passwords have worked correctly there. It's pretty infuriating.... this is the perfect bookend to "the keys don't work for the first year".
 
jered said:
Yes, on https://lucidmotors.com/portal as indicated, and the old and new passwords have worked correctly there. It's pretty infuriating.... this is the perfect bookend to "the keys don't work for the first year".
Click to expand...
I wonder if it’s a third party or something in their servers. My Air is back in service because it keeps demanding a PIN to drive it, even when phone key is connected.
 
socktucker said:
I wonder if it’s a third party or something in their servers. My Air is back in service because it keeps demanding a PIN to drive it, even when phone key is connected.
Click to expand...
I doubt it's anything so nefarious; we've seen a near infinite capacity for bad software implementation in-house! (Thankfully since 3.6.0 we have yet to get a single spurious alert... it looks like that is finally fixed. Hands-free DDPro also works, and the Google POI data is a big improvement.) I suspect it's more "profile corruption" or bad OAuth tokens or... who knows.
 
You must log in or register to reply here.
Back
Top