I was going to try and get some of these, do you know which wiper model you got? Just want to make sure they fit. Theres 3 different options, KB9P, CarbonFit, and SlimFit.
they seem to work well and performance hasn't degraded after a year. Only complaint is they kind of squeak in one direction, but I think that started only after I had a ceramic coating put on the glass so maybe that coating and the wipers aren't compatible.
and yes I have a Dream Edition so it has everything. The heating in the wipers is part of the wiper body, which is why you can replace the wiper inserts but not the wipers themselves as they seem to be Lucid proprietary.
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.
I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.
I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.
I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.
I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
I'm back. 2500+ miles in a bit over 10 days including several days of downpours in New Mexico. The wipers still have a little squeak when dry or just with a little washer fluid but worked great in the rain with no noise or chattering at all.
I just replaced my stock wiper blades for the Kimblade linked earlier in the thread. I purchased the CarbonFit, 28” driver/26” passenger.
It is a pretty simple task to change out the wiper blades. Remove the stock wiper blade holders from the wiper arms by pressing in the tab. Then on one end of the wiper blade holder you’ll see a small arrow dictating to press the tab. Pressing the tab allows the end cap to come off allowing you to slide the OEM blade out. Cut the Kimblade to fit the Lucid one you took out. Slide in the Kimblade and reattach the wiper blade holder end cap. Reinstall on the wiper arm and done. I’ve only used them briefly, but so far so good.
Thank you! I was just thinking about these again as it was drizzling the other day and the Kimblades were squeaking just enough to be annoying to me. Ordered this one to give it a try.
I went through 3 sets of inserts, total. They all were unusable within a few weeks after install.
Covering windshield with thin film and then after the wipe rain fell and stayed on the window so clear time was minimal, kind of what I have with the rear wiper now as I haven’t figured out how to take it apart and get PIAA in there too!
If anyone figures out rear wiper let me know…or I will interrogate mobile tech first week of December.
Then I got two bad sets - my originals and the replacements I got earlier this year when I complained. Those were just as bad so I complained again when I had other service done in August and was told they would replace them again but I'd have to pay $65 for them. I passed and bought the Kimblade inserts instead which work way, way better but they do have a squeak.