Stock wipers?

I user them on my gravity (and our BMW iX). Its just the blade refills, trim to fit into the stock wipers
I was going to try and get some of these, do you know which wiper model you got? Just want to make sure they fit. Theres 3 different options, KB9P, CarbonFit, and SlimFit.
 
I got the carbon but not sure there’s really any difference in the refills
 
Do you have the convenience package with heated blades? Whatever info and photos you can spare would be appreciated!
 
How are you liking them long term?
they seem to work well and performance hasn't degraded after a year. Only complaint is they kind of squeak in one direction, but I think that started only after I had a ceramic coating put on the glass so maybe that coating and the wipers aren't compatible.
 
Do you have the convenience package with heated blades? Whatever info and photos you can spare would be appreciated!
and yes I have a Dream Edition so it has everything. The heating in the wipers is part of the wiper body, which is why you can replace the wiper inserts but not the wipers themselves as they seem to be Lucid proprietary.
 
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.

I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
 
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.

I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
have you ever tried a glass polish? Autoglym makes an easy one.
 
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.

I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
Can you post a pic of how you placed/trimmed them?
 
have you ever tried a glass polish? Autoglym makes an easy one.
I have but I'm thinking of trying the Bilt Hamber Re-View on the Gravity as people rave about how great their products are.
 
Adding to this thread with my experience with the Kimblade wipers. As I said before I've had two bad sets of stock wipers - the ones that came with the Gravity in December and a set that the service center replaced during my service in April. Both were bad, even with cleaning and adjustment.

I got the carbon Kimblades linked here and trimmed them carefully to fit the entire "channel" of the wiper so they sit well but not too tight so they're pinched. I used the included window cleaner pad as long as they sent one. So far it's a major improvement. There is a tiny squeak if the windshield isn't wetter but no chattering and they clean the windshield great. I'll report back after some more long term usage, including the ~2500mi roadtrip I'm going on next week.
How was the road trip and the wiper performance (or are you still on it)?
 
How was the road trip and the wiper performance (or are you still on it)?
I'm back. 2500+ miles in a bit over 10 days including several days of downpours in New Mexico. The wipers still have a little squeak when dry or just with a little washer fluid but worked great in the rain with no noise or chattering at all.
 
I just replaced my stock wiper blades for the Kimblade linked earlier in the thread. I purchased the CarbonFit, 28” driver/26” passenger.
It is a pretty simple task to change out the wiper blades. Remove the stock wiper blade holders from the wiper arms by pressing in the tab. Then on one end of the wiper blade holder you’ll see a small arrow dictating to press the tab. Pressing the tab allows the end cap to come off allowing you to slide the OEM blade out. Cut the Kimblade to fit the Lucid one you took out. Slide in the Kimblade and reattach the wiper blade holder end cap. Reinstall on the wiper arm and done. I’ve only used them briefly, but so far so good.
 
It's worth noting that windshield coatings, like Rain-X or modern ceramic films, can sometimes cause wiper chatter or squeaks.
 
I bought Kimblade and their wiping was meh and they were squeaky at low moisture levels.

Replaced with PIAA I used and trust for over a decade and now perfectly happy. Installed for 2 other Gravity in my area and no complaints!

Just need a screw driver to break some plastic and extract the blade and then cut small side to size. Or buy 22”

 
I bought Kimblade and their wiping was meh and they were squeaky at low moisture levels.

Replaced with PIAA I used and trust for over a decade and now perfectly happy. Installed for 2 other Gravity in my area and no complaints!

Just need a screw driver to break some plastic and extract the blade and then cut small side to size. Or buy 22”

Thank you! I was just thinking about these again as it was drizzling the other day and the Kimblades were squeaking just enough to be annoying to me. Ordered this one to give it a try.
 
  • Like
Reactions: 037
My Gravity wipers squeaked like crazy and didn’t wipe well at all when I got my car. I told service and they replaced them for me free of charge.

The replacement ones are perfectly fine. I don’t think it’s the design of the blades. I think some folks just get bad ones.

I think some of these cars spend a few too many weeks in the hot Arizona sun after manufacture.
 
My Gravity wipers squeaked like crazy and didn’t wipe well at all when I got my car. I told service and they replaced them for me free of charge.

The replacement ones are perfectly fine. I don’t think it’s the design of the blades. I think some folks just get bad ones.

I think some of these cars spend a few too many weeks in the hot Arizona sun after manufacture.
I went through 3 sets of inserts, total. They all were unusable within a few weeks after install.

Covering windshield with thin film and then after the wipe rain fell and stayed on the window so clear time was minimal, kind of what I have with the rear wiper now as I haven’t figured out how to take it apart and get PIAA in there too!

If anyone figures out rear wiper let me know…or I will interrogate mobile tech first week of December.
 
My Gravity wipers squeaked like crazy and didn’t wipe well at all when I got my car. I told service and they replaced them for me free of charge.

The replacement ones are perfectly fine. I don’t think it’s the design of the blades. I think some folks just get bad ones.

I think some of these cars spend a few too many weeks in the hot Arizona sun after manufacture.

Then I got two bad sets - my originals and the replacements I got earlier this year when I complained. Those were just as bad so I complained again when I had other service done in August and was told they would replace them again but I'd have to pay $65 for them. I passed and bought the Kimblade inserts instead which work way, way better but they do have a squeak.
 
Back
Top