Lucid Gravity License Plate Screws

Krys

New Member

Joined
Oct 24, 2025
Messages
10
Reaction score
3
Cars
Lucid Gravity DE
Gravity DE Number
GD16373
Has anyone installed anti-theft screws in their Gravity’s license plates yet? Curious if anyone happens to know the sizes of the screws. If not I’ll be trying to figure out an option and will report back!
 
I finally got my plates and went to mount them to discover I only received screws in the rear license plate frame. So I have to order 4 more. The nearest Lucid service center is an hour round trip for me - not worth going there just for this.

The screws they provided for the back are T25 pan head, M5 x 10mm. The weird thing is they are coarse thread, not the usual 0.8 thread pitch for M5. So a #10-14 x 3/8" coarse thread screw should also work. Makes sense since they are biting into plastic, not metal.

I don't think tamper resistant security screws will do a whole lot for you since both the front and rear plates screw into plastic frames. If someone really wants your plates they could probably just pull them off.
 
Did you ever figure out which screws worked for the front license plate? I'm in NJ and am dealing with the same issue. Rear plate has the screws and the front one has nothing. To further complicate things I needed to get the external ezpass transponder because the uv glass blocks the regular one that I keep in my other cars. I'm thinking I need longer screws to accommodate that transponder, but really don't know. I'm surprised they went through the trouble of asking if you need a front license plate holder and then not giving you screws to put that license plate on, which would cost them a dollar. So strange.
 
... To further complicate things I needed to get the external ezpass transponder because the uv glass blocks the regular one that I keep in my other cars...
Gravity has a transponder window at the top of the windshield to the right (passenger) side of the rear view mirror electronics assembly housing. Your transponder should work fine if attached there.

Someone please correct me If I'm wrong here.
 
I ended up using some #10 x 1/2" stainless steel self tapping screws. Since it's just biting into the plastic most any self tapping screw will work. You just don't want it too long so it goes out the back of the frame and into the bumper.

I'm sure they just overlooked this during our deliveries and would gladly provide the screws if you stopped by the service center.

But it's worth $6 to me just order a box of screws and not make an hour trip to the service center.

With the extra license plate holder you'll have to add some length in there for the screws.

Do you know about the cut out in the windshield RF coating, to the left of the rear view mirror housing as you look from the front of the car (so passenger side of the mirror)? I placed my toll tag there and it reads just fine.
 
Back
Top