Problem with Gravity Rear Hatch

hmp10

Active Member

Founding Member
Verified Owner
Supporting Member
Joined
Mar 7, 2020
Messages
8,713
Reaction score
14,418
Location
Naples, FL
Cars
Air DE-P, 2 Gravity DEs
Air DE Number
395
Gravity DE Number
067
238
Referral Code
033M4EXG
The rear hatch on one of our Gravities no longer raises to full opening height. We have tried to push it manually up to full height in order to use the fob to reset the height adjustment, as instructed, but the hatch will not move. (We have another Gravity for comparison so know this one is no longer opening fully. Short by just over a foot, in fact.)

Any suggestions?
 
From the user manual:
Liftgate Height Adjustment

1. Manually move the liftgate to the
desired position.

2. Press and hold the liftgate button
on the lower edge of the liftgate
for 3 seconds. When the hazard
light flashes, the liftgate position is
saved.

The liftgate will always open to the
saved position until a new position
is saved.
 
From the user manual:
Liftgate Height Adjustment

1. Manually move the liftgate to the
desired position.

2. Press and hold the liftgate button
on the lower edge of the liftgate
for 3 seconds. When the hazard
light flashes, the liftgate position is
saved.

The liftgate will always open to the
saved position until a new position
is saved.

Yes, we tried this. The problem is that the hatch can't be manually moved to the fully-open position. We have both tried to push on it simultaneously.
 
Yes, we tried this. The problem is that the hatch can't be manually moved to the fully-open position. We have both tried to push on it simultaneously.
It sounds like a service call, unless customer care has additional info.
 
I'm sure you have checked, but no externally visible parts stopping? Panel getting in the way, etc.?

Sorry to be asking, but it certainly sounds like a mechanical stop as opposed to software. Physically pushing should be able to override any little actuator assembly.
 
I'm sure you have checked, but no externally visible parts stopping? Panel getting in the way, etc.?

Sorry to be asking, but it certainly sounds like a mechanical stop as opposed to software. Physically pushing should be able to override any little actuator assembly.
Yeah, this. When our lift gate motor stops (because we stop it) we can manually move it just fine.

Service :/
 
Yeah, this. When our lift gate motor stops (because we stop it) we can manually move it just fine.

Service :/

Yep. The hatch sometimes stops halfway up on our other Gravity, and we can always push it up manually the rest of the way. But since a reboot fixes it, I assume that's a software problem. But on this Gravity, the hatch won't budge no matter how hard you push. And reboots don't fix it.

We've also opened the hatch using the app and using the icon on the Pilot Screen. But it always stops short of fully open.
 
Last edited:
Back
Top