3.0 on Air

X + Mic + brakes until you hear the first chime, and then release. It may take a couple tries and holding time YMMV until you hear that chime. Turn down your music when you’re doing it so you can hear that chime.

Yeah, that's the hard reset that messed with all the settings I mentioned in my post. So logo reset is gone then?
 
That reset has never messed up any of my settings.

If you've had to reset so many times that you can confidently state on what it "never" does, then you should know enough about this software to never say never.
 
Yeah, that's the hard reset that messed with all the settings I mentioned in my post. So logo reset is gone then?
I believe in the new 3.0, the first chime replaces the infotainment reset and a second chime if you don’t release after the first chime is the hard reset. I’m not sure as I never go past the first chime but someone else posted that info.
 
Hey Air owners. I've had 3.0 UX (2.11.0) for a week on my AT. Love most of it! However, every time I let the car sit for a while (like 15 minutes) , when I open the door and sit, the left and center cockpit panels disply quickly, but the righthand panel and pilot do not. The timings vary, see attached for an example.

The righthand panel shows my chosen scene backgroiund (stars) after about 10 seconds, then 10 se cord or so later thesameon the pilot panel. Finally, 30-45 seconds later, they display what they should.

Any one esle seeinng this? Support looked at the logs remotly and do not see anything unusual. Awaiting a call from the service center.
Yes, I'm still seeing this type of behavior. Sometimes less noticable than others, but I can be halfway backed out of the garage before the surround camera on the pilot panel come up.
 
Yeah, that's the hard reset that messed with all the settings I mentioned in my post. So logo reset is gone then?
That has not been the case for years. What others have said is correct.
 
That has not been the case for years. What others have said is correct.

I asked the question because my settings were borked using the hard reset on the current version (two weeks ago) when I couldn't find the logo reset.
 
After an initial learning curve I am pleased to find how much better Tidal functions with the new processor and update.
 
I asked the question because my settings were borked using the hard reset on the current version (two weeks ago) when I couldn't find the logo reset.
Fascinating. That’s definitely unusual. Are you certain it was the hard reset that did it, and not that they were already reset ahead of that? Did you get a new CCC, which does reset everything?

That would be the first I’ve heard of this happening since years ago.
 
Fascinating. That’s definitely unusual. Are you certain it was the hard reset that did it, and not that they were already reset ahead of that? Did you get a new CCC, which does reset everything?

That would be the first I’ve heard of this happening since years ago.

I have a 2025 so I've always had CCCv2. And yes, I reset in the work parking lot and had to re-adjust things that were normal on the drive in. I absolutely hate the backup mirror thing pointing down and there's no way I wouldn't have noticed it leaving my driveway.
 
I have a 2025 so I've always had CCCv2. And yes, I reset in the work parking lot and had to re-adjust things that were normal on the drive in. I absolutely hate the backup mirror thing pointing down and there's no way I wouldn't have noticed it leaving my driveway.
Well then I have no idea. It shouldn’t have done that lol
 
Back
Top