What's new
By:

Software 3.3.20 Update

BrianBigNFun said:
Can echo what’s been said already
First drives without false error warnings since I got it 3 weeks ago
Didn’t have to jiggle the fob and the screen boots up much faster now
I never had the hurricane winds before but I will say it remembers what HVAC and seat warming settings I had on before where before it often changed some things when I got back in the car
Also- Several sanctuary videos are gone but I wouldn’t even have checked until someone said they’re disappeared as well
Click to expand...
From @HC_79's update experience; it takes a while for sanctuary videos to re-download.
 
240 said:
Does this latest update fix the issue with the car not fully booting up correctly? I’ve noticed several times where something happens with the startup, I get some headlight errors/rear wheel steering error/or something else and the car doesn’t have internet.

During times the car doesn’t have an internet connection, it seems like the car doesn’t attempt to reconnect or fix the internet issue.

I’m worried that when I drive into an underground parking structure there’s not going to be internet. Will my car re-establish an internet connection automatically when it becomes available?
Click to expand...
As someone who has been living with a perpetually OFFLINE Gravity (unless connected to home WiFi) I am thrilled to report the handoff from WiFi to LTE and vice-versa is now working again! 🤩
 
Installed 3.3.20 overnight last night and drove it for about 60 miles of city and highway driving running some errands. Some things I noticed:
1) When I put the Gravity in park to exit the vehicle, I still get an error that it cannot record videos for halo secure and to contact service. All the cameras work just fine, so I am assuming this is a software bug with the beta software.
2) When switching from wifi (at home) to cellular (anywhere else), my Gravity stays offline even after this update. Previously, I found that if you are on just cellular after leaving wifi, the vehicle will be online the next morning. I'll test that again today but I assume the same waiting overnight trick will work. Once it gets online via cellular, it has stayed online for me so long as I leave wifi turned off. I was hoping this was fixed with this 3.3.20 update, but I guess not.
3) I did still get a bug switching from the default screen to the seats in the pilot panel where the seat icon near the bottom showed it was on the seats UI, but the pilot panel didn't update. I went back to the default screen, waiting a second or two, and then hit the seat icon again and then it successfully switched.
4) I got zero erroneous warnings while driving.
5) DreamDrive worked as expected.

Overall, I am very pleased with this update. I think if the software had been at this state for the end of June deliveries and for the reviewers, the narrative around Lucid and the Gravity would have been quite different. We'll see how things are going over the next few weeks, but it feels like the Gravity has turned a corner. I'm now looking forward to feature updates (I'm looking at you CarPlay, PaaK, geofencing for auto lock/unlock, and hands free highway driving).
 
bryway said:
As someone who has been living with a perpetually OFFLINE Gravity (unless connected to home WiFi) I am thrilled to report the handoff from WiFi to LTE and vice-versa is now working again! 🤩
Click to expand...
Ha! I just posted saying that this is still broken for me. I'm glad it is working for you. Maybe I'll do a hard reset and see if that helps.
 
Installed update first thing this morning. Took about 45 minutes. Cool splash screen and immediate screen loads upon entering. Had one error during drive to gym “Assisted lane change not available” but then did work fine on ride back home. After one hour workout, another immediate screen loads upon entry but no splash screen (not needed due to screens loading so quick.) On drive home stopped for breakfast tacos and got the constant proximity warning beeping. Reversed a couple feet, pulled back up and but back in to Park all beeps stopped. I left the fob in car so wife and daughter could jam to music while I went in. Did not have to shake fob upon returning to get going again but was only away for 3-4 minutes so can’t 100% confirm if this is fixed. HVAC not defaulting to high fan speeds at start but still will not remembering that I prefer leaving it set to AUTO.

Also, Live View now works for me as long as I disconnect phone from WiFi.
 
So seems update was a success so far.

Any improvement in call or camera quality? Any improvement in switching between profiles?

Funny, I know the issues for a car I don’t even own yet, but here we are. My wife calls my annoying but I call me an “educated buyer”.

Thanks as always, all.
 
Taking the BIG chance here and installing while on my trip on Florida, so wish me luck! This way, I'll have a 700 mile trip worth of data on how it's working
 
Finally got my update about 2 hrs ago and installed it. Opened the door afterwards and the screens came on instantly and the SirusXM started instantly playing...that's a good sign. Going to a holiday party later across town. I'll report back later with improvements/new quirks.
 
torvald27 said:
Ha! I just posted saying that this is still broken for me. I'm glad it is working for you. Maybe I'll do a hard reset and see if that helps.
Click to expand...
Now you've got me worried my 'fix' may not stick. So far I've left and returned home several times today, and the handoff has continued to work. Fingers crossed my TCU continues functioning as expected.

But that's the thing, isn't it? It's anxiety-inducing to *not* know whether something that's working perfectly fine today, will be working perfectly fine (as expected) tomorrow.
 
bryway said:
Now you've got me worried my 'fix' may not stick. So far I've left and returned home several times today, and the handoff has continued to work. Fingers crossed my TCU continues functioning as expected.

But that's the thing, isn't it? It's anxiety-inducing to *not* know whether something that's working perfectly fine today, will be working perfectly fine (as expected) tomorrow.
Click to expand...
I rebooted my Gravity and then tested it a few times while just sitting in my garage by manually turning off wifi, waiting 5-10 min, trying to connect to it in the app, turning back on wifi, waiting 5-10 min, turning off wifi, waiting 5-10 min and then trying to connect again. Each of those times, I was able to connect to it on both wifi and cellular. Perhaps it just needed another reboot? I'm going to test it more tomorrow with actually leaving the house again, but my fingers are crossed that it is actually fixed.
 
Bunnylebowski said:
The splash screen is COOL, nicely done stylish graphic. I don’t get black screens anymore. Keycard works without the fob. Haven’t got any false alerts. HVAC category 5 hurricane noise is gone. Initially when I installed the software I still got some false errors and screen out of sync with what was selected but I did a hard reboot and that seems to have wiped whatever cobwebs were lingering as now the screens work as expected. This is really good as now maybe the focus can shift more towards new features like hands free drive assist and Halo, in addition to further improving stability etc.
Click to expand...
Agree it’s 💯 better BUT, I still have false errors about Dream Drive and Sensors.

Also, quite odd, but the blind spot cameras are delayed now - noticeably. If I use the turn signal, it could be 1+ second before camera comes on. It also takes an extra second to turn off. Strange as it never happened to me before. Used to be instant on/off in 3.3.9. That’s the only “new” bug I’ve seen.

Otherwise, everything is snappy and great.
 
I installed the update this morning and have gone on a couple of drives since. The software has performed flawlessly. I wasn’t experiencing any significant issues before, so it’s not really a change. The one thing I can say seems to have improved is the fan speed on Auto, which often was too vigorous in the past (so I had stopped using it) but now seems more mellow. Just as importantly, this update doesn’t seem to have caused any new issues.
 
Got the update pushed to me. Installed in less than an hour. Won’t be driving for the next few days but glad to see the positive feedback.
 
Ron_Burgundy said:
Agree it’s 💯 better BUT, I still have false errors about Dream Drive and Sensors.

Also, quite odd, but the blind spot cameras are delayed now - noticeably. If I use the turn signal, it could be 1+ second before camera comes on. It also takes an extra second to turn off. Strange as it never happened to me before. Used to be instant on/off in 3.3.9. That’s the only “new” bug I’ve seen.

Otherwise, everything is snappy and great.
Click to expand...
Rebooting it usually fixes slow to respond cameras. It’s happened to me over multiple versions.
 
Update took about an hour today. Key fob didn’t need update and functioned much quicker. iPhone and SiriusXM started up really quickly. No issues noted during 15 minute drive. However, when I got home I decided to charge the car on my home Lucid charger (100 amp breaker). I plugged the cable in the car and the charger was flashing but the lights on the car stayed white. I was not able to remove the charging cable and the car screen said cable connected. I finally set a start time for charging on the car console and at that time it tried to charge but came up with an error on the console. I was able to remove the charging cable and when I reinserted it things went back to normal charging state and took off. I had never set a schedule up previously and was always able to just connect the charger and it would take off. Guess the default has changed. Sure don’t want to schedule charging every time I want to charge the car.
 
bryway said:
As someone who has been living with a perpetually OFFLINE Gravity (unless connected to home WiFi) I am thrilled to report the handoff from WiFi to LTE and vice-versa is now working again! 🤩
Click to expand...
I had same issue last two weeks. Today lucid customer service walked me through a reset and then connecting to my cell phone hotspot and then it magically reconnected the car and now it works on LTE too. Internal connectivity module reset is what he said.
 
You must log in or register to reply here.
Back
Top