Homelink Setup Tips?

[hellolucid]

Make sure you delete the existing Homelink profile, or rename it, and set up a new profile. Press Add New to create a new profile and then, as you did, press the remote near the U in Lucid on the front bumper. Be sure to press the same button on the remote that you use to operate the garage door. The car should respond (honk, lights blink). Press Continue (or Start, can't remember which) on the pilot panel WITHOUT first pressing the Learn key on the opener. That should take you to the testing phase. You'll need to press test 2 or 3 times. You have 90 seconds to do this. Shouldn't be a problem. Also, the garage door remote must be trained with the opener before using it to train the car. Sorry to point out the obvious! Good luck!

so i ended up calling Homelink who wanted me to reboot the system (remove the power outlet, remove battery backup, wait 2mins and reconnect everything). that resolved it for me.

 

[DeaneG]

so i ended up calling Homelink who wanted me to reboot the system (remove the power outlet, remove battery backup, wait 2mins and reconnect everything). that resolved it for me.

So it was a software issue... and not Lucid's!
Glad you figured that one out.

 

[BruceH]

so i ended up calling Homelink who wanted me to reboot the system (remove the power outlet, remove battery backup, wait 2mins and reconnect everything). that resolved it for me.

Glad it’s working for you. Technology is wonderful…when it works!

 

[hellolucid]

so i ended up calling Homelink who wanted me to reboot the system (remove the power outlet, remove battery backup, wait 2mins and reconnect everything). that resolved it for me.

so my Lucid Air has a new problem with the new garage opener. it works for like 2 weeks and it loses connection. this has happened twice already. when it works, it works 'okay' (i've to be in the line of sight to make it work but it worked. my older opener didn't have this problem but anyways that's not my current issue).

the current problem is that it stops working after about 2 weeks. i have to remove and re-pair the homelink from scratch. anyone else run into this? i gave homelink a call and they want me to reach out to the manufacturer.

 

[Aka-none]

so my Lucid Air has a new problem with the new garage opener. it works for like 2 weeks and it loses connection. this has happened twice already. when it works, it works 'okay' (i've to be in the line of sight to make it work but it worked. my older opener didn't have this problem but anyways that's not my current issue).

the current problem is that it stops working after about 2 weeks. i have to remove and re-pair the homelink from scratch. anyone else run into this? i gave homelink a call and they want me to reach out to the manufacturer.

Most reports are works, doesn’t work, or pita to setup all over again.
I think you’re the first where it works great for a specific period then you have to start over again.