Search results

I just found out that Danny Ventura has left Lucid, which means I no longer have a point of contact for service needs. I tried calling the Natick service center, but no one answered and the phone prompts after that seem to indicate I've been transferred to the main customer service line. I've...

My blade on the drivers side is leaving a constant streak on the downstroke every time. It continued doing this even after replacing the insert. It’s so bad I basically have to leave the wipers off most of the time. When the water eventually dries it leaves a horrible water streak across my...

@borski were you able to hear this distortion? I'm not sure I could.

I just brought my car in and they addressed another service advisory that sounds related to this one: Job: 2 TSC-B0824-001-01 Lower A-Pillar Speaker Distortion Cause: The fabric tape covering the body holes in the lower A-pillar region is susceptible to vibration and flutter, acting as an...

I checked my service invoice, and they did cite "TSB-B1122-001 Lower A-pillar Door Access Holes - NVH Rework (Both Sides)" as the repair. So good to know I won't need to rip the trim apart my self to check. Or I guess I could have just asked, but... ripping things apart is more fun ;-)

I had this fixed about a month ago on my AGT, a 2022. The problem was only obvious with certain songs, but on those songs it was aweful. After it was fixed though, everything sounds different. It's amazing the difference that made. Is there a similar possible problem on the passenger side? I...

I asked Tidal support and they said they would continue to have 24-bit 192kHz FLAC files supported. Seems this statement was only meant to indicate for files without a current higher quality encoding that it would fall back to this lower quality encoding. I don't know what their plan is to...

I was concerned by this line: > While we have at least 16-bit, 44.1 kbps FLAC versions for nearly all MQA tracks today, we may not have a replacement for every single one. Does this mean that they are replacing MQA (which was 24-bits 192kHz) with CD-quality tracks? You can do 24-bit 192kHz with...

I grabbed a measuring tape and found that the blades are 25.5" (driver's) and 19.5" (passenger's). That's... not a whole number of inches, which is confusing. I'm not up for paying $150 for something so basic as changing wiper blades. Lucid isn't a wiper blade manufacturer, they must get these...

Does anyone know the size or model of the windshield wiper blades? I need to replace mine, but there's no detail in the user manual about their sizes. I've tried looking it up on Autozone and Advanced Auto Parts websites, but they have no data either.

I've heard this sentiment several times, but I disagree with the sentiment. For electric cars, charging it is a significant part of the experience. Plugging in a CCA-1 cable is just annoying. It leads me to have a bad experience, trying to manipulate it ever so slightly to get the angle of this...

Has anyone tried disassembling the center console to just replace the charger under the existing plastic surface? It seems like it should be possible. Usually interior trim pieces can be removed with a minimal number of screws and trim clips.

I’m hoping Lucid will offer a retrofit to replace the current CCS 1 port on my air with an NACS port eventually. I hate using an adapter at home to convert it to my preexisting Tesla wall charger’s cable, and using CCS at fast chargers is a nuisance. NACS really is a much better connector.

I have a sound that comes and goes when I change the screen dimming, but it seems to be coming from the driver's door. At some brightnesses, it emits a high pitched beeping sound, at others it is totally quiet. The screen brightness seems to auto adjust somewhat, so there are some times of the...

On a totally unrelated note, I'd like the rear seat headrests to be collapsible. The rear window isn't that big, and those headrests take up a nontrivial amount of the visible space. I've seen collapsible headrests in other brands, maybe Volvo or Mercedes? It would be a nice thing for rear...

I didn't get the announcement but my SA told me there was going to be an event for owners on Saturday. Does anyone have confirmation of this, and a time?

I just got back from my local shop, and the problem is different than I thought. The offset isn't the problem, the inner diameter of the wheel doesn't clear the break caliper. There's a ridge on the inside of the wheel that decreases the inner diameter by about 3mm, and it's enough to eliminate...

I just had my local shop attempt to install my 19" Tesla Cyclone wheels, and the spacing on the rear was not enough. The rim comes in direct contact with the rear break calipers. Can anyone confirm the offset of the Lucid 19" wheels? Did either @Shuasha or @MTL_AirGT have a problem with this...

I own X-Ice for 19" wheels, and don't like the way they feel. They are very soft and mooshy feeling. Alas, the tread seems to last _forever_, so they're going back on my AGT tomorrow.

Did you confirm if the tpms sensors would be compatible? I just had to order a set for my winter wheels, I was told by service that the ones used by most manufacturers (including Tesla) won’t work.